Monday, December 19, 2011

Tech Notes :- Uniden DECT 6.0 Display Shows Searching

I have faced this frequently with my Uniden DECT phone.The solution is simple.Press and hold the end key on one of the handsets, while holding the end key, press and hold the # key. After 2 or 3 seconds the handset should beep and read "deregister Handset" and underneath that "Base Unavailable". Select base unavailable option and confirm. Then handset should read "Handset not registered" now, you can place handset on base" Once you place the handset in the base it should register in 2 - 3 seconds and you are good to go, Sometimes you might need to remove the battery of the handset and connect it back and then repeat the above process.
Post a Comment